TBS TechnologiesTBS Help Center
Home
Home
  • TBS Driver Installation
    • Linux
    • Windows
  • Troubleshooting

    • Common errors on DVB receiving
    • Secure Boot
    • DVB Receiving issues
    • PCIe Bus Error
    • win11 memory integrity disable
    • Win10 driver power state failure(BSOD)Tips
    • DVB Cards can not detected
    • How to use more than 64xTuners
    • Lost driver after reboot
    • Can not display power and quality with Astra
    • CPU Power Mode
  • Encoder Tips

    • Unable to ping or login to web GUI
    • Video quality is not good enough
    • Frame rate/Key interval (key frame) setting trick
    • Forgot Encoder IP or web GUI password
    • Access to Encoder system
    • Stream to Internet from local
    • RTMP/RTMPS push does not work
    • Unable to play UDP multicast stream
    • "Pixeled (Mosaic)" in the video
    • No Audio in the stream
    • The audio in the stream is ok, but no video
    • How to push stream to Youtube
  • Transcoder Tips

    • How to push RTMP streams to social media (youtube, facebook)
    • How to Set Up a Unicable System & Import YouTube Source with Kylone

Video quality is not good enough

1. possibility:

The original source is already bad quality. In this case, "encoding" is unable to make the video quality better.

2. possibility:

Maybe the output bitrate is not properly set. The following is the recommended bitrate setting:

4k/2160p @30 fps stream, bitrate:

12-20M bps

1080p @60 fps stream, bitrate:

6-9Mbps

1080p@30/25/24fps, bitrate:

3-6Mbps

720p @60/50fps, bitrate:

2.8-6Mbps

720p@30/25fps, bitrate:

1.8-4Mbps

480p stream, bitrate:

0.5-2Mbps

360p stream, bitrate:

0.4-1Mbps

And of course, if you have a lot of bandwidth, you can set the bitrate as high as possible.

Prev
Unable to ping or login to web GUI
Next
Frame rate/Key interval (key frame) setting trick